John Deere 4010: The miracle from the meat market | Successful Farming

2022-06-15 11:23:01 By : Ms. Leina Chen

Disclaimer: This post is about the John Deere 4010, not the 4020. I may use phrases like "game-changer" and "ground-breaking" and some of the 4020 nerds aren't going to be happy about it. Still, the fact remains – without the 4010, there is no 4020. (And I say "4020 nerds" lovingly, bless their hearts.)

So, now that the 4020 guys have all stomped off to the barn to sharpen their pitchforks and light their torches, we've got a few minutes to talk about how John Deere changed the game in 1960 with the New Generation of Power.

And how it all got started in April of 1953. . . in an old meat market, of all places.

Before we go there, though, here are the details on the John Deere 4010 in the picture above.

Auction Date: June 16, 2022 — 10 a.m. CDT (Online bidding is open right now.)

Auctioneer: Matt Maring Auction Co.

Format: Onsite with online bidding.

Link to the 1961 John Deere 4010

Now, let's dig in and talk New Gens!

So, it's the early '50s. For close to 30 years now, you could have whatever engine you wanted in your John Deere tractor, so long as it only had two cylinders. Most every other tractor company was using a 4-cylinder design at the time (Oliver was mainly using a six-cylinder), and Deere's management team knew that it wasn't making up ground as fast as they wanted to.

Harvester was pretty squarely in control of the market, and part of the reason was because their four-cylinder was nice and smooth! (Hit the photo to shop Farmall letter-series tractors!)

See, Sales & Marketing (and I suspect a good number of dealers) claimed that the two-banger was outdated and that farmers didn't want them anymore. Engineering said that they couldn't do much more with them without going bigger. That also meant making a wider tractor that wouldn't work with row spacing. Furthermore, the bean counters said that the machines in the factory weren't able to keep up with the demand anyway and that they were pretty inefficient. (And given that some of those machines were going on three decades old, that doesn't surprise me.)

The engineers said that without making the tractor itself wider, they couldn't do much more with the two-cylinder platform like the one in this John Deere 70 High Crop Diesel (one of 44 built). This one sold at the Mecum Gone Farmin' auction in March 2019. Hammer price was $18K. (Hit the photo to shop 2-banger Deeres!)

It was a rare moment in Deere's history where nearly every department of the company was in complete agreement.

The two-cylinder was dead. If they were to "pass International Harvester" (the famous edict that came from Bill Hewitt in 1955), something had to change.

At some point in late 1952 or early 1953, Deere's management team made the decision to move off of the two-cylinder architecture. Normally there's some sort of historical documentation for when decisions like this were made, but for the New Gen tractors, the official decision to start work was not. (You'll start to see a pattern emerging here — and it all revolves around secrecy.) The management team knew that they could use the element of surprise to their advantage, and during the course of the project, they did everything they could to protect that.

Deere's biggest concern with the project was making sure that nobody knew the tractors were coming. People talk, and word gets around. Furthermore, I'm pretty certain that every tractor company out there had spies in Waterloo. People who paid attention when a truck left the factory with something different on the back. People who found ways to cozy up with Deere's engineers and/or management, listening for hints at what was being built. If it all sounds very cloak and dagger. That's because it was.

Furthermore, Deere knew how this game was played, because they played it too.

They rented an old butcher shop in a residential part of Waterloo for a design team to work in! And the first thing they did when they got the keys to the place? They blacked out the windows so nobody could see in. The nosey neighbors in the area feared that somebody was about to open a bar, and they even went as far as to circulate a petition against it! They called it "The Meat Market," and for about two years, that's where a design team of about 20 engineers and a few outside consultants worked to design the new lineup! In 1955, the company bought land on the outskirts of town and built what later became known as the Product Engineering Center (Lee Klancher, John Deere Evolution).

Here's the neat part about The Meat Market: the building is still standing today at the corner of Falls Avenue & Knoll Avenue in Waterloo.

Yep, some of the most game-changing John Deere tractors in history were designed in a building that's now a daycare!

(Side note: Deere history buffs, let's please be respectful of the business that currently occupies the space. Thank you.)

Anyway, on with the story.

No, this wasn't the only goal. However, it's the one that everybody seems to remember, most likely because Charles Wiman (CEO of Deere at the time) made that comment. I believe that it was somewhat tongue-in-cheek, but the fact is, the project goals were a radical departure from what the factory was turning out at the time. It was truly a clean-sheet design.

Here were the goals, from William Purcell's notes (Purcell, 1961) as laid out in Merle L. Miller's book, Designing the New Generation John Deere Tractors.

From a technical standpoint, the goals were fairly routine: state-of-the-art, more power, easier to use, and operator comfort. Miller's book takes a very deep dive into all of this, so if you want to nerd out on the details, that's a great place to start!

Here's a cutaway diagram from Deere's marketing team from the early '60s. This shows some of the innovations and advancements in the New Generation tractors. Hit the photo to search New Gens available on Tractor Zoom!

Engine development definitely took center stage for the John Deere 4010 (and the rest of the tractors in the series). Multiple different engines were designed and tested — I believe there were five different styles considered. They tested everything from a big two-cylinder to various sizes of inline-four and inline-six — even a couple of different iterations of V-4 and V-6s! In the end, though, the engineers settled on an inline six-cylinder; it provided the best power and torque curve with the least amount of vibration. Truthfully, for a row crop tractor, I still think that's the best configuration. Six in a row makes good power and lots of grunt down low, which is what's needed when pulling implements.

There were three versions: a 380-cubic-inch diesel, a 302-cubic-inch gas, and a 302-cubic-inch propane. Diesel was the king when the John Deere 4010 went on sale, outpacing the gas and propane by about 10:1. And, as you'd expect, the diesel made the most PTO horsepower (the Nebraska Lab tested it at 84), followed by the gasser (80.86) and trailed by the propane (80.6).

The 4010 you can buy at Matt Maring's auction on June 16 is an early-production diesel. Hit the photo to see the Tractor Zoom listing!

Although the goal was function over form with the New Gen series, the designers still wanted something that looked good to the eye. They wanted ultra-clean lines that flowed nicely together, so the tractor looked "right" from just about any angle. That's not a super-easy thing to do, but with Henry Dreyfuss & Associates (HDA) steering the sheet metal, they definitely hit a home run (in my opinion, at any rate). One thing I've always loved about these tractors is the way that the joints and body panels line up, and that you don't see a bunch of fasteners all the way down the hood. Everything is hidden, and to me, that's ultra-clean design.

This 4000 does a little better job of showing the clean lines than the 4010 up above. It's in the same sale, too, by the way. Hit the photo to see the full auction list on Tractor Zoom!

From the creature comfort side, the 4010 boasted a number of improvements. The platform became more clearly defined and moved forward about a foot. This meant that the seat was now ahead of the rear axle, which resulted in a much more comfortable driving position. It made it easier to see, too. The overall wheelbase was about 6 inches longer than a 730, but that made a pretty big difference in the field. Furthermore, the controls moved up onto a dashboard; no more bending over or reaching forward to change gears, etc. Lastly, John Deere and HDA spent a lot of time working on the seat itself, building a suspended, fully adjustable seat for both height and weight. And, with the help of Dr. Janet Travell (who later became well-known for treating President Kennedy's back problems), they engineered more supportive seat cushions!

You could do a longer piece on all of the technical innovations on the John Deere 4010 (there's a lot of meat on that bone), but if I did, this article would take forever to read and people would end up getting pretty bored. So, suffice it to say this; Deere put a LOT of thought and effort into making the New Generation tractors as good — and cutting edge — as they could. Better hydraulics, proper power steering, a more accessible fuel tank, and the 8-speed synchro transmission were all part of the package — and they set a very high standard. Heck, the Mexico-made 4455s had an 8-speed synchro, and they were built into the early '90s!

The John Deere 4010 was probably subjected to more testing than anything else they'd ever built!

I believe that the New Generation tractors were tested harder and more thoroughly than anything John Deere had ever built before. No, I can't prove it, but that's my perspective. I think the numbers would support it, too. According to a display at Deere's Tractor & Engine Museum in Waterloo, there were a half million hours logged during the testing process for these tractors.

Let that sink in for a second.

If you do the math on that, it works out to 57 years.

Now, that sounds pretty impressive (and it definitely is), but let's also remember that this was spread across 41 test mules, 53 test engines, and all of the new parts that went into them.

Deere was extremely comprehensive when testing these tractors. Everything had to prove itself before it was approved. The engineers tested stuff that you'd never even think of testing, either, like how hard you could mash a lever before it bent, or how long it took for the seat springs to fall apart. They tested in all climates, on a multitude of different farms from all over the country, and with a multitude of different variables (operator skill level, etc.). To put it real bluntly, John Deere beat on these tractors like rented mules. (And it paid off, too!)

Here's the most mind-blowing part of all of this, though. Somehow, even through all of this testing out in the open on farms across America, they managed to keep it a secret! From 1956 when Deere began testing out in the open all the way through 1960, they're pretty certain that none of the competition knew it was happening!

They put more emphasis on security than they ever had before. Tractors left the lab in closed trailers that were locked by Deere employees and opened by Deere employees. The truckers didn't have keys, from what I've been told. In some cases, I believe drivers got to the town where the test site was located and surrendered their truck for a couple of hours while Deere's engineers took it to the actual farm ground and unloaded it. Like I said earlier, it was real cloak-and-dagger stuff.

Test mules were carefully disguised, too. From a distance, John Deere 4010s look enough like late-model Massey Harris tractors that if you painted them red and yellow, nobody could really tell. Obviously today, it's not hard to tell them apart, but remember: back then, the New Gen tractors were a completely different body shape from anything Deere had ever built. Everybody expected boxy tractors that made two-banger noises, so they didn't really know what they were looking at! It was a brilliant move, honestly, using the casual observer's mind against them, and the company exploited it very well.

Furthermore, Deere continued to espouse the two-cylinder line, making tweaks here and there all through the '50s. Everybody knew that Deere was sticking with what worked, and that was just the way they were, so it wasn't out of the ordinary to see the 70 take a new paint job and some subtle changes and suddenly become the 720, you know?

Deere did a really, really good job keeping the whole project quiet. From the top all the way down, if you weren't essential to the new line, you were left in the dark.

Right up until August 30, 1960, that is.

To launch the New Generation of Power, John Deere pulled out all the stops. They spent 15 months planning a one-day event in Dallas where all of the new models would be on display. It was primarily for dealers, but all in all, Deere flew nearly 6,000 people in from all over the world to see these new tractors. Here's a neat little promo video Deere's historical team put together using footage from that day.

The full model lineup — just about everything Deere had in its product catalog — was on display the morning of August 30, 1960, in the 15-acre parking lot of the Cotton Bowl. At the time, it was over $2 million in inventory! Crazy to think that two X9s on a dealer's lot would eclipse that number by a wide margin today, huh? (Each of those letters on the dome? They're 24 feet tall!)

The one-day event was a big deal all the way around, featuring fireworks, music from Grammy-winning bands, food, and lots more. However, the one event that stood out more than anything else? That happened at the exclusive Neiman-Marcus department store in downtown Dallas.

There, at the jewelry counter, stood a great big 20-foot-long gift-wrapped box. At noon, Tish Hewitt (CEO Bill Hewitt's wife) cut the ribbon and opened that great big box to reveal a 3010 Diesel. Not just any 3010, though. This one was draped in dozens of carats of diamonds. People talk about blinged-out tractors. Well, in this case, Deere did it first. It was a big publicity thing, and the diamonds (held in place by scotch tape) were removed after the crowd had cleared out, but still.

I can't even begin to imagine how much money the company spent on that event — it had to have been millions!

Despite what the 4020 nerds might argue, the 4010 was truly where John Deere's dominance began.

Getting the John Deere 4010 and the rest of the New Gen tractors out the door wasn't cheap; the new equipment and tooling required for production were well over $20 million, according to the annual reports. However, Bill Hewitt's challenge to the company — "pass International Harvester" — was one that everybody took seriously, knowing full well what it would require to do it.

By 1963, the hard work paid off. Annual reports show that Deere's annual sales in 1963 were $762 million, while Harvester's were only $664 million. They'd FINALLY done it.

It had taken longer than planned — the tractors were supposed to launch in 1958, but building from the ground up takes time. The x20 & x30-series two-cylinders? They were both moves intended to buy enough time to make certain that when the line released, they were ready. All in all, the sales were very brisk, and total production for the John Deere 4010 was between 57,000-58,000 (I've seen multiple different numbers).

Deere didn't build many 4010 Industrials — I believe the number was 170 diesels and 10 gassers. I watched this beauty sell at a Mecum Gone Farmin' auction in Davenport back in 2019. Hammer price was $12,600.

I keep coming back to this, but I think it's the absolute truth. The reason that the John Deere 4010 and the rest of the New Generation of Power were so successful is due to the utter secrecy of the project. They surprised everybody — even many of their own employees —with these tractors when they launched for the 1961 model year. Nobody saw it coming (regardless of what people may tell you —hindsight is 20/20), and because of that, they couldn't react fast enough to compete! It set the wheels in motion for Deere to lead the race to more modern farming, and it's one of many reasons that they are who they are today.

Below, you'll find the auction info one more time. Matt Maring has a terrific retirement sale in the works with this one, with four 10/20-series tractors as well as some good mid-range workhorses that'll fit in on just about any farm today! 

Auction Date: June 16, 2022 — 10 a.m. CDT (Online bidding is open right now.)

Auctioneer: Matt Maring Auction Co.

Format: Onsite with online bidding.

Link to the 1961 John Deere 4010

Side note: There are lots of great books out there on Deere history. Here are two of them that I recommend. Hit the photos for more information! In the case of Merle L. Miller's book, I've also included a link to Amazon to pick it up — it's not a real easy book to find!

This is THE deep-dive account of the New Generation design process from start to finish. Merle L. Miller was an engineer with Deere for many years, and there's a ton of great info in this book! 

Lee Klancher's award-winning history of all things John Deere. It's a terrific piece that's got tons of data, stories of how and why things were developed, and lots of terrific photos! (You might even find a few words from me in there!) Hi! I’m Ryan, and I love tractors. It doesn’t matter if it’s a showpiece, an oddball, or seen its share of life ... if it’s unique and it’s listed by one of our auctioneer partners at Tractor Zoom, I’m going to show it off a little bit! This equipment is all up for auction RIGHT NOW so you can bid on it. I think it’s cool, and I hope you will too! This is Interesting Iron!

© 2022 Meredith Corporation. All Rights Reserved.

All is provided by Barchart Solutions.

Futures: at least 10 minute delayed. Information is provided 'as is' and solely for informational purposes, not for trading purposes or advice. To see all exchange delays and terms of use, please see